Lotus 4" Round LED 12W Slim Wet


Dimmable. Energy Star and T24 Certified. cULus approved. Pot light housing not required. IC rated for direct contact with insulation. Air-tight and damp location approved. 5 & 10 year warranties.

Lotus 4" Round LED 12W Slim Wet

  • Dimmable
  • cULus Listed, cETLus Approved and Energy Star Certified
  • Type IC Rated – Approved for Direct Contact with Insulation
  • Pot Light Housing is NOT Required even for Insulated Ceilings
  • Air-Tight and Wet Location Approved
  • Warranty: 10 Year on Residential, 5 Year on Commercial Installations
  • Suitable for Wet Locations – Showers and Outdoor installations exposed to Rain. Not suitable for steam showers and saunas.



We recommend LED/CFL dimmers that have a low range adjustment dial. After all fixtures are connected to the dimmer adjust the dial to the lowest position before the lights start to flicker of shut down. This setting depends on the local voltage and number of fixtures per dimmer.
For a typical LED dimmer rated for 150W LED load the maximum number of fixtures per dimmer is 30.

Connecting the Driver

Open the cover of the junction box. Push and remove the knockout on the side plate. Install standard L16 cable connector. Insert line voltage feed into the cable connector and splice same colour wires using the included quick connectors. Close the cover. Connect the driver to the light fixture – the arrows on the male and female parts of the connector between the driver and the fixture should match. Tighten the connector by hand.

Locating the Driver

Locate next to the fixture – run line voltage wiring to first junction box and “daisy chain” to the junction boxes of the other fixtures.

Or install all drivers at one location and use low voltage extension cables to the fixtures. Use only extensions provided by the manufacturer. Available jumper cables are 10 feet (3m) – cat # EXC10. Cables are linkable.

Maximum run should not exceed 40 feet (12m).

Light Color

Neutral White 4100K is whiter, colder and more energizing light. Using this colour will make the room look white, modern and brighter. We recommend the Neutral White for bathrooms, offices and work areas, garages, kitchens with white or dark countertops and cabinets.


  • Default Driver Input Voltage: 120V AC (Dimmable)
  • Optional Driver Input Voltage: 277-347V AC (Not Dimmable)
  • Power factor: > 0.95
  • Energy Used: 12W
  • Halogen equivalent: 65W
  • Beam Angle: 120°
  • Light colour options: Warm White 3000K and Neutral White 4100K
  • Light output: Warm White 700 lm, Neutral White 800 lm
  • CRI: 84 for 3000°K and 82 for 4100°K
  • Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
  • Compliance: cULus, certified to CSA STD. C22.2 No. 250.0
  • Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight


  • ID 4″; OD 5″; Thickness 1″
  • Cut out: 4″ to 4 1/4″
  • Junction Box Dimensions (with driver inside): 3 5/16″ x 3 5/16″ x 1 1/8″

Suitable for Wet Locations – Showers and Outdoor installations.
Not suitable for steam showers and saunas.

Ships within: Two days.

Related products

View all
Lotus 4" Gimbal Recessed LED
Lotus 3" Gimbal Recessed LED
Lotus 2" Slim Gimbal Recessed LED
Lotus 4" Round Regressed 14.5W LED
Left Continue shopping
Your Order

You have no items in your cart